Skip to main content

How to Fix a Computer That Turns On and Then Off

 



Is your computer turning off by itself immediately or at some point before the operating system loads? If so, you could be facing anything from an electrical short to a serious hardware problem.

Because there are several reasons that your PC might be shutting off by itself during the boot process, it's important that you step through a logical troubleshooting process like the one we've described below.

       If your computer is, in fact, turning on and staying on, even if you don't see anything on the screen, see How to Fix a Computer That Won't Turn On for a more applicable troubleshooting guide.

 

This process could take anywhere from minutes to hours depending on why the computer turns off so quickly after being turned on.

1.   Troubleshoot the cause of the beep code, assuming you're lucky enough to hear one. A beep code will give you a very good idea of exactly where to look for the cause of your computer turning off.

If you don't fix the problem that way, you can always return here and continue troubleshooting with the more generic information below.

2.   Verify that the power supply voltage switch is set correctly. If the input voltage for the power supply doesn't match the correct setting for your country, your computer might not stay powered on.

Chances are your computer wouldn't power on at all if this switch is wrong, but an incorrect power supply voltage might also cause your computer to turn off by itself.

3.   Make sure you're keeping the computer cool enough, or it might overheat to the point that it shuts down. Follow that link for some easy tips anyone can follow to cool down their computer.

Some computer cooling techniques for desktops require you to open your computer, but that's fairly easy to do.

4.   Check for causes of electrical shorts inside your computer. This is very often the cause of the problem when the computer powers on for a second or two but then powers off completely.

Inspect the inside of your computer for problems that cause shorting. If you don't take the time to troubleshoot this possibility thoroughly you may end up missing a simple electrical short and instead performing costly hardware replacements later for no good reason.

5.   Test your power supply. Just because your computer came on for a few moments doesn't mean that the power supply unit in your computer is working properly. The power supply tends to cause more problems than any other piece of hardware and is very often the cause of a computer turning off by itself.

Replace your power supply if it fails any of your tests.

If you do end up replacing the PSU, keep the computer plugged in for at least five minutes before you try powering it on. This pause gives time for the CMOS battery to charge a little.

6.   Test the power button on the front of your computer's case. If the power button is shorting out or even just sticking to the case, it might be the reason your computer is turning off by itself.

Replace the power button if it fails your testing or if you suspect it's not working properly.

7.   Reseat everything inside of your computer. Reseating will reestablish all of the connections inside your computer which may have wiggled loose over time.

Try reseating the following and then see if your computer stays on:

·         Reseat all internal data and power cables

·         Reseat the memory modules

·         Reseat any expansion cards

Unplug and reattach your keyboard and mouse as well. There's little chance that either one is the cause of this problem but we shouldn't overlook them while we're reseating everything else.

8.   Reseat the CPU only if you suspect that it might have come loose or might not have been installed properly.

We call this out separately only because the chance of a CPU coming loose is very slim and because installing one is a sensitive task. This isn't a big concern if you're careful, so don't worry!

9.   Start your PC with essential hardware only. The purpose here is to remove as much hardware as possible while still maintaining your computer's ability to power on.

If your computer turns on, and stays on, with essential hardware only, proceed to Step 10.

If your computer continues to turn off by itself, proceed to Step 11.

This troubleshooting step is easy enough for anyone to complete, takes no special tools, and could give a lot of very valuable information. This isn't a step to skip if, after all the steps above, your computer is still shutting off by itself.

10.                Reinstall each piece of non-essential hardware, one component at a time, testing your computer after each installation.

Since your PC powered on with only the essential hardware installed, those components are working properly. This means that one of the devices you removed is causing your computer to turn off by itself. By installing each device back into your computer and testing after each installation, you'll eventually find the hardware that caused your problem.

Replace the faulty hardware once you've identified it.

11.                Test your PC using a Power On Self Test card. If your computer continues to power off by itself with nothing but essential PC hardware installed, a POST card will help identify which piece of remaining hardware is to blame.

If you don't already own and are unwilling to purchase a POST card, skip to Step 13.

12.                Replace each piece of essential hardware in your computer with a "known good" identical or equivalent spare piece of hardware, one component at a time, to determine which piece of hardware is causing your computer to shut off automatically. Test after each hardware replacement to determine which device is faulty.

Most normal computer users don't have a collection of working spare computer parts at their disposal. Our advice is to revisit Step 11. A POST card is not expensive and is a much more reasonable approach than stocking spare computer parts.

13.                Finally, if all else fails, you'll likely need to seek professional help from a computer repair service or from your computer manufacturer's technical support.

If you're without a POST card and also without spare parts to swap in and out, you're left not knowing which piece of your essential computer hardware is faulty. In these cases, you have little option than to rely on individuals or companies that do have these resources.


Comments

Popular posts from this blog

How to Remove Temp Files from your PC

  Temp files can easily occupy a substantial amount of space in your PC.   When you've never really checked the number of temporary files which are currently there on your PC then you might be shocked with the amount that would have been collected by now.   The procedure would be steady and over time there could be a pile of useless crap files that wouldn't really be helpful for your computer because it can slow it down considerably.   There are numerous ways you can eliminate these files regularly to make certain that your computer is efficient and that you have enough disk space available. What are these Documents? Temp files are usually made by different applications for different reasons.     By way of instance, when you download files, the file will be stored as a temporary document whenever you're using it.   Normally, these files aren't really dangerous.   But if there is malware in this kind of document then it can create lots of damage to your PC.   However

How to factory reset on Windows 10

  Restoring a Windows computer back to its factory settings is an excellent way to handle speed and performance problems that have built up on the system over time.   If you discover your PC is working slower than anticipated, it could be time to look at a factory reset.   Keep reading to learn how to choose a Windows 10 system back to its original factory settings. A factory reset - also called a Windows system restore - returns your computer to the exact same condition it was in when it rolled off the assembly line.   It will remove programs and files you have created and installed, delete drivers and return settings to their defaults.  There are various reasons why you may want to restore factory settings in your Windows 10 PC.   Over time, files and programs you do not have to build on your computer, taking up space on your drive and using the processing power.   Resetting Windows provides you with a fresh start with no additional files or programs, reclaiming drive space and enhan

Clean System - Three Tips to Clean System Completely

  As a matter of fact, the slow system isn't just due to disturbing viruses but also other elements like junk files in the system.   Thus, you need to learn how to wash the system in order to get high speed back. If you use Windows-based systems for ages, then it's probably that the system was packed with a mess of junk files.   As a system needs clearing dust-up, your computer requires regular maintenance also.   Here are 3 tips for you to wash the system completely. 1.     But since the registry is your database of the computer, you can't be too careful to clean it up.     2.   Defragment the disk. The hard disk might be in a mess as you've used it for ages.   Since Disk fragments slow down read-write rate of the hard disk drive and system efficiency, you can use defragmenting programs of Windows to clean them up.   But it is actually slow and time-consuming so selecting a strong and specific tool is your best pick.   Whatever you use it or alternative third-par